FPV Drone LiPo Battery — Industrial B2B Product Guide

 

High-performance FPV LiPo battery packs engineered for sustained high-current draw, minimal voltage sag, and strict cell-to-cell voltage variance. Built for commercial drone builders, FPV brands, and industrial distributors requiring reliable OEM/ODM lithium power solutions.
Target Applications: 5-inch freestyle quads, long-range exploration rigs, heavy-lift cinematic cinewhoops, and industrial inspection drones.
Target Audience: Drone manufacturers, B2B wholesale distributors, and commercial UAV system integrators.

 

 
First 1234 Last
 
Key Features & Performance Advantages

Ultra-Low Internal Resistance (IR):

Automated tab-welding and high-grade copper nickel strips keep IR under 1.2 mΩ per cell, verified via automated impedance testing before pack assembly to minimize thermal buildup during high-amp transient loads.

Stable Discharge Curve Under Load:

Formulated with high-conductivity lithium cobalt oxide chemistry to maintain voltage plateau stability under 100C to 150C discharge rates, preventing sudden power throttling during aggressive flight maneuvers.

Optimized Energy Density Ratio:

Precision electrolyte balancing delivers a high mAh-to-weight ratio (mAh/g), extending flight times without imposing excessive payload weight on the frame.

Factory-Matched Cell Consistency:

Pre-assembly sorting groups cells by internal resistance and capacity within a ±1 mV tolerance window, preventing premature pack imbalance and extending operational cycle life.

 

Technical Specifications

 

 

Parameter

Specification Range

Chemistry

Lithium Polymer (LiPo) / High-Voltage LiPo (LiHV)

Cell Configuration

3S to 6S (Custom series/parallel builds available up to 12S)

Nominal Voltage

11.1 V (3S) to 22.2 V (6S) / 11.4 V to 22.8 V (LiHV)

Capacity Range

1300 mAh to 6000 mAh

Continuous Discharge Rate

100C – 150C

Burst Discharge Rate

Up to 200C (3-second pulse)

Standard Charge Rate

1C to 5C (Rapid charging supported)

Discharge Connectors

XT60, XT90, EC5, QS8

Balance Connectors

JST-XH standard

Wire Gauge

10AWG / 12AWG / 14AWG high-strand silicone wire (heat-resistant up to 200°C)

Typical Applications & Use Cases
Freestyle & Racing FPV:
High burst discharge and rapid transient recovery for agile, high-G acrobatic flight and competitive racing quads.
Cinematic FPV:
Stable voltage output and reliable endurance for heavy cinema camera payloads (RED, Blackmagic, mirrorless systems) mounted on 7-inch to 10-inch long-range platforms.
Industrial & Commercial UAVs:
Extended hover endurance and thermal stability for aerial mapping, search and rescue, utility inspection, and automated patrol drones.

 

Customization & OEM/ODM Capabilities
 

Tailored manufacturing configurations to align with exact platform integration requirements:

Electrical Architecture:

Custom cell capacity, discharge rates, voltage configurations (3S to 12S), and integrated smart BMS (Battery Management System) options.

Physical Dimensions:

Custom width, length, and height profiles, as well as specialized soft-pack or hard-case rigid enclosures.

Interface & Cabling:

Custom wire length, tailored wire gauges (10AWG–16AWG), and specialized connector soldering (XT60, XT90, AS150, or custom proprietary plugs).

Branding & Labeling:

Custom PVC shrink-wrap color schemes, laser-engraved connectors, and private-label packaging with custom barcode or QR serialization.

Quality Control, Testing & Compliance

Rigorous in-house testing protocols ensure batch consistency and operational field safety:

Cell Sorting & Grading:

Automated testing equipment measures internal resistance, open-circuit voltage, and discharge capacity under load before pack pairing.

Assembly Verification:

100% factory inspection covering ultrasonic tab-weld pull testing, dimension verification, and final pack voltage balancing.

6S-22.2V 4000mAh 130C FPV Racing Lipo Battery
3S-11.1V 750mAh 100C FPV Racing Lipo Battery

Destructive & Stress Testing:

Regular batch testing for overcharge, over-discharge, short-circuit protection, thermal shock (85°C oven exposure), and drop/vibration simulation.

Regulatory Compliance:

Full documentation and certification support for UN38.3, MSDS, CE, RoHS, and FCC standards to ensure seamless global customs clearance.

Packaging & Supply Chain Logistics
 
 
 

Packaging Standards:

Anti-static individual packaging, reinforced inner partition boxes, and UN-certified dangerous goods (DG) outer cartons.

 
 

Minimum Order Quantity (MOQ):

100 units per specification for standard stock models; 500 units for custom OEM/ODM configurations.

 
 

Lead Time:

7 to 10 business days for standard inventory sample dispatch; 20 to 30 days for bulk OEM production runs.

 
 

Shipping Channels:

Dedicated dangerous goods (DG) logistics support for air cargo and sea freight compliant with international lithium battery transport regulations.

 

 

 

Frequently Asked Questions

 

 

Q: What is the exact cell voltage tolerance before final pack assembly?

A: All individual cells are matched within a ±1 mV delta to ensure uniform discharge rates and prevent localized cell degradation over repetitive charge cycles.

Q: Can you supply custom connector types soldered directly to the harness?

A: Yes. We maintain standard RC inventory (XT60, XT90, EC5, QS8) and source specialized industrial power plugs according to engineering blueprints.

Q: What is the minimum order quantity (MOQ) for custom private-label shrink wrap?

A: The MOQ for custom branding, logo printing, and specialized PVC color wrapping starts at 500 units per model type.

Q: Are official test reports included for air and ocean freight customs clearance?

A: Yes. Every bulk export order includes UN38.3 test summaries, MSDS safety sheets, and factory QC inspection logs.

Q: What is the standard production lead time for bulk volume orders?

A: Standard production runs take 20 to 30 days following engineering specification sign-off and deposit confirmation.

Q: Do you offer High-Voltage LiPo (LiHV) cell options for extended flight times?

A: Yes. LiHV cells capable of safely charging to 4.35 V per cell are available across our standard and custom capacity manufacturing lines.

 

modular-1
Request a Quote, Samples & Technical Support

Contact our engineering and sales team for volume pricing tiers, technical drawing reviews, or customized OEM sample prototyping.

ManiaX Power Technology Co., Ltd. is one of the most reliable fpv drone lipo battery manufacturers and suppliers in China, also supports customized service. Please feel free to wholesale bulk durable fpv drone lipo battery made in China here from our factory.

Send Inquiry